MODEL:- TLP-CPHxx-3P-R
Transtech Lightning Protector Three Phase, 3 Mode with LED’s & Relay for Class I / CAT C or less
GENERAL DESCRIPTION
The TLP-CPHxx-3P-R is a “compact design hybrid series” lightning and transient surge protector which provides protection for electrical/electronic equipment connected to three-phase distribution systems.
The TLP-CPHxx-3P-R is a true 3-mode parallel-connected protection device offering 3 levels of kA rating in all 3 modes and offers LED indication and a relay.
All units have a 75V 25kA (20kA at 10 x 8/20μs) gas arrestor between neutral and earth.
For mains supply of greater than 100A, adequate HRC fuse or MCB protection must be installed prior to the TLP-xxx-3P.
FEATURES
- Compact design – space saving
- Low “let thru” voltage
- Designed and manufactured to ISO 9001
- Internally protected – automatic reset
- Local status indication by RED LED’s
- Remote status indication relay
- High Energy designed pcb’s
- Gas arrestor between neutral and earth
- CE Marking / C-tick N 2909
- Full 3 mode protection
- DIN 43880 compliant
- Designed to pass IEC 61643-1:2005 and AS/NZS 1768:2003
- Compliant with IEC 62305-4:2010
NOTE: This device must be installed by a Qualified Electrician
TECHNICAL DATA
| Normal Working Voltage | See Table 2 below |
| Maximum Working Voltage | 476VAC rms (phase to phase) |
| Working Frequency | 40 – 60Hz |
| Peak Let-Through Volts | See Table 2 below |
| Maximum Mains Current | Unlimited (parallel connected) |
| Fuse Protection | Must be fuse protected over 100A mains |
| Imax | See Table 2 below |
| Iimp | See Table 2 below |
| Response Time | Less than 25nS |
| Alarm Relay Contacts | SPCO (1 amp @ 240VAC), drops out on fault |
| Contact Configuration | 2 = Com / 1 = NC / 3 = NO (no power on) |
| Surge Reset | Automatic |
GENERAL SPECIFICATION
| Operating Temperature | -40 to +70 Deg C |
| Terminals | 16mm² solid max / 10mm² flex max |
| Remote Terminals | Plug in 2.5mm² |
| Indicators | RED LED’s |
| Housing Material | Mild Steel (Powder coated) |
| Dimensions | TLP-CPHxxx: 85 (W) x 110 (D) x 75 (H) TLP-CPHHxxx: 155 (W) x 110 (D) x 75 (H) |
| Weight | 850 grams |
| Mounting | DIN 43880 Standard DIN Rail |
SPECIAL FEATURES
| LED’s(3) | L1, L2, L3, RED = healthy |
| Indication for Faults | Alarm Relay |
| Model | Working Voltage | Frequency | Imax | Iimp | In | Let Thru V | Response Time |
|---|---|---|---|---|---|---|---|
| Phase-Phase | 1 Pulse | 10/350us | 15×8/20us | @3kA | |||
| TLP-CPH65-3P-415-R | 415V | 40-60Hz | 65kA | 5kA | 18kA | < 810 | 25nS |
| TLP-CPH80-3P-415-R | 415V | 40-60Hz | 80kA | 5kA | 20kA | < 810 | 25nS |
| TLP-CPH130-3P-415-R | 415V | 40-60Hz | 130kA | 8kA | 50kA | < 810 | 25nS |
| TLP-CPHH150-3P-415-R | 415V | 40-60Hz | 150kA | 9.5kA | 58kA | < 810 | 25nS |
| TLP-CPHH-200-3P-415-R | 415V | 40-60Hz | 200kA | 12.5kA | 70kA | < 810 | 25nS |
| TLP-CPHH-240-3P-415-R | 415V | 40-60Hz | 240kA | 15kA | 92kA | < 810 | 25nS |
TLP-CPH series
