TransTech® is now part of Bestech Group
Process Loop Powered Signals – LPSC Series
TransTech® is now part of Bestech Group
Process Loop Powered Signals – LPSC Series
Single Product
Process Loop Powered Signals – LPSC Series
The LPSC-xxx is a series of loop powered two wire transmitters, the LPSC draw energy from the 4-20mA loop to function and at the same time provides a proportional 4-20mA signal relative to the input.
The LPSC series accommodates inputs such as AC voltage, AC Current from CT, millivolts dc,Volts dc, milliamps dc, RTD, T/C and a SW (slide wire) inputs.
- Full galvanic isolation
- Both DIN and G Rail mounting
- External monitor points (40 to 200mV)
- External span and zero
- Very small footprint area 25mm wide
- Supply Voltage: 12Vdc to 48Vdc
- Supply Power: Loop powered
- Two Port Isolation: 1500V nominal
- Output: 4 to 20mA only
- Loop Resistance: Approx. 250 ohms/loop maximum
- Input Types available:
- ACI: CT secondary either 1Amp or 5Amp
- ACV: 0-300Vac
- RTD: 3 Wire PT-10, PT-100, PT-1000 – Min Span 30Deg C
- SW (slide wire): 2 & 3 Wire 0-5k Ohm, 0-10k Ohm – Min Span 10 Ohms
- T/C: E, J, K, N, S, T Min Span 8mV
- VC: 0-300V or 0-50mA – Min Span 5mV or 1mA
- MV: 0-5mV min span
